The B-LOC brand is synonymous with world class quality, engineering excellence and unrivaled customer support. Fenner Industrial Motion B-LOC Keyless Bushings provide a high capacity, zero-backlash shaft-to-hub connection by using the simple wedge principle. An axial force is applied by series of annular screws to engage circular steel rings and mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.
B-LOC keyless bushings appear in these markets:
- Climate Control
- Distribution Centers
- Food Processing
- Glass
- Livestock Farming
- Meat Processing
- Mining & Aggregate
- Oil & Gas
- Packaging
- Wood Processing
B-LOC models
B106 (Inch / Metric)
B109 (Inch / Metric)
B112 - Heavy Duty (Inch / Metric)
B113 - Extra Heavy Duty (Metric)
B115 - Medium Duty (Inch / Metric)
B117 - High Bending (Metric)
B400 (Inch / Metric)
B800 (Inch / Metric)
B-LOC WK Series (Inch / Metric)
B-LOC Compression Hubs
- BCH20 – Lightweight (Inch / Metric)
- BCH50 – Heavyweight (Inch / Metric)
B-LOC Shrink Discs
- SD10 (Standard, Separate SD - Standard, Half-Type SD - Standard)
- SD20 (Lightweight, Separate SD - Lightweight, Half-Type SD - Lightweight)
- SD30 (Heavyweight, Separate SD - Heavyweight, Half-Type SD - Heavyweight)
- SD40 (Standard)
- SD42 (Heavyweight)
- SD50 (Standard)
- SD51 (Lightweight)
- SD52 (Heavyweight)
*A wide variety of sizes is available for every model. Welcome to inquire for further details
Product Introduction
Series B112, B115, B113
- Wide, double taper design for enhanced bending moment capacity
- Exceptional concentricity with thru-bored hubs
- No axial movement during installation
- Available in Standard, Heavy and Extra-Heavy Duty models
Series B117
- Shorter length than other locking assemblies with two tapers
- Exceptional concentricity and ability to transmit bending loads
- High bending moment capacity (Mb = 0.65 x Mt)
- Continuous inner promotes ease of removal
- No axial movement during installation
Series B109
- Designed for shafts as small as 1/4" or 6mm
- Shallow, single taper design with integrated push-off threads
- Exceptional concentricity and ability to transmit bending loads
- No axial movement during installation
Series B106
- Shallow, single taper design with integrated push-off threads
- Exceptional concentricity and ability to transmit bending loads
- Use optional integrated spacer sleeve to mount narrow hub components
- No axial movement during installation
Series B103
- Shallow, single taper design with integrated push-off threads
- Exceptional concentricity and ability to transmit bending loads
- Limited axial movement during installation
Series B800
- Shallow, single taper design
- Exceptional concentricity
- Thin, extra wide sleeves provide low contact pressures allowing for smaller diameter hubs
- Integrated spacer sleeve eliminates axial movement during installation
- Minimal OD/ID ratio
Series B400
- Self-releasing, double taper design permits simple adjustment and removal
- Not self-centering. Available pilot bushings provide pre-centering when required
- No axial movement during installation
Series 10, 20 & 30 Shrink Discs
- External locking device
- Provides extremely concentric and well-balanced mechanical interference fit
- Offered in Standard, Light, and Heavy Duty series
- Also available in Split and Half Shrink Disc designs
Series 40 Shrink Discs
- External locking device
- Easy and quick installation with no torque wrench required
- High torque performance and dynamic balance
WK Shaft Couplings
- Rigid shaft coupling
- External locking device
- Transmits high torque and bending moments using the same principles as the Shrink Disc
